Gateway, Remote I/O

HUB Module for Remote I/O (JC Series)

HUB Module for Remote I/O

The HUB Module extends total length of network cable and branch cable.

  • 3 or 7-port

Products Line up

SYSTEM CONFIGURATION EXAMPLES (HLS use)
SYSTEM CONFIGURATION EXAMPLES
* Max. transmission distance between master module and HUB module, HUB module and HUB modul, HUB module and slave module is as follows. 100 m at 12 Mbps, 200 m at 6 Mbps and 300 m at 3 Mbps.
* Be sure to connect HLS0A/HLS0B to the host side.
* The terminating resistor must be enabled for the modules at both end of the communication line. The terminating resistor is incorporated in the feeder side port of the HUB module.
DIMENSIONS unit: mm (inch)
DIMENSIONS
Introduction Series Line up