Wide range of power measuring transducers – including AC volts, AC current, power factor, watts, vars and phase angles measurements. Multi power monitor has output options – Modbus, Ao and Do.

Multi Power Transducers / Monitors

Multi Power Monitor with Modbus 53U CE RoHS 1/4 DIN (96 x 96 mm) panel size Four digital displays Single type module is usable for all of single-phase/2-wire and 3-wire, three-phase/3-wire and 4-wire systems. All measured variables can be transmitted to the host PC via RS-485/Modbus RTU. Energy count pulse or limit alarm output selectable Up to 4 optional analog outputs Programming lock to prevent unwanted configuration changes Input range up to 480 Vac, 1 A or 5 A

Multi Power Monitor with Modbus & CC-Link 54U / 54UC / 54UL RoHS 110 x 110 mm panel size Robust screw terminal connection Four digital displays 60-segment bargraph Single-phase/2-wire and 3-wire, three-phase/3-wire and 4-wire systems All measured variables can be transmitted to the host PC via RS-485/Modbus RTU or CC-Link,LONWORKS Energy count pulse or limit alarm output selectable Up to 4 optional analog outputs Programming lock to prevent unwanted configuration changes Input range up to 480 Vac, 1 A or 5 A Modbus:54U CC-Link:54UC LONWORKS:54UL

Multi Power Transducer with Modbus L53U CE RoHS Single type module is usable for all of single-phase/2-wire and 3-wire, three-phase/3-wire and 4-wire systems. All measured variables can be transmitted to the host PC via RS-485/Modbus RTU. Energy count pulse or limit alarm output selectable Up to 4 optional analog outputs Remote and local programming using the PC Configurator Software Input range up to 480 Vac, 1 A or 5 A DIN rail mounted

Multi Power Transducer with 10 Analog Outputs LSMT4 RoHS Measures AC current, voltage, active/reactive/apparent power and power factor 10 x DC voltage/mA outputs plus 2 x Do Parameters are freely programmable with the front control buttons or by PC DIN rail mounted

Page top

Power Transducers

Power Transducers LT Series CE RoHS AC current up to 5A, AC voltage up to 550V. True RMS sensing Auxiliary powered and self powered types selectable Surface or DIN rail mounting M4 screw terminal Conform to IEC 60688 Optional terminal cover Additional pulse rate output for totalizing counter for watt transducers

High AC Current Transmitter with lntegral Probe CTS2 Detecting high current at the flexible current probe and providing a porportional low-ripple standard signal appropriate for computer use Wide frequency band can be accepted Clipped around a conductor without disconnecting the conductor Rogowski coil type Isolation up to 2000 V AC High-density mounting

Page top

Clamp-on Current Sensors

Clamp-on Current Sensors CLSC RoHS Easy-to-install, clamp-on type current sensor Over-voltage clamp element for safety in open circuit 1A Output Wide frequency band Screw terminal connection Model CLSC -10 -25 -50 -60 Applicable max. wire diameter 24 mm 24 mm 36 mm 36 mm Primary rating 100A 250A 500A 600A Secondary rating 1A 1A 1A 1A	Clamp-on Current Sensors CLSD RoHS Easy-to-install, clamp-on type current sensor Over-voltage clamp element for safety in open circuit 1A Output Model CLSD -A -B -C -D Applicable max. wire diameter 24 mm 36 mm 60 mm 100 mm Primary rating 200A 400A 1000A 2000A Secondary rating 1A 1A 1A 1A
Clamp-on Current Sensors CLSE CE RoHS Easy-to-install, spring-loaded, clamp-on type current sensor Over-voltage clamp element for safety in open circuit Wide frequency band Screw terminal connection Model CLSE -R5 -05 -10 -20 -40 -60 Applicable max. wire diameter 10mm 10mm 16mm 24mm 36mm 36mm Primary rating 5A 50A 100A 200A 400A 600A Secondary rating 1.65mA 20mA 20mA 20mA 20mA 20mA

Signal Conditioners | Two-wire Signal Conditioners | Power Transducers | Indicators |
Tower Light | Limit Alarms | Gateway, Remote I/O | Paperless Recording System | PC Recorder |
PID Control Components | Electric Actuators & Position Sensors | Lightning Surge Protectors |