Application Notes
Strain Gauge

Isolation / Temperature / Pulse / Strain Gauge / Potentiometer / AC
Pneumatic / Function / Power Supply / Alarm / Power Mesurement
Trend & Log/Communication / Surge Protection / Other Topics

031020 Weighing system with push-botton tare
[ HTML ] [ MS Word MS Word 80k ]
031021 Measuring the rate of material conveyed on a conveyer belt
[ HTML ] [ MS Word MS Word 108k ]
031022 Measuring the flow output by straing gauge transmitter
[ HTML ] [ MS Word MS Word 92k ]
031023 Zero point compensation for strain gauge transmitter
[ HTML ] [ MS Word MS Word 124k ]
031024 We use M-System's strain gauge transmitter model MXLCF. When we re-adjust the excitation voltage to 6V, which is the recommended value of the strain gauge, the indicator displays 20% greater (=6 tons) than the actual load (5 tons = input 50%).
[ HTML ] [ MS Word MS Word 120k ]
031025 I have an application involving the simple need to convert a millivolt signal from a load cell into a 4-20mA DC to go to a PLC. Our load cell is calibrated for 2mV/V with a 10V dc excitation supply. Which unit should I use?
[ HTML ] [ MS Word MS Word 152k ]
031026 I want to use M-System's strain gauge transmitter model M2LCS. But there is a problem. The excitation voltage of the M2LCS is 5V, while the recommended excitation voltage of my strain gauge is 12V.
[ HTML ] [ MS Word MS Word 80k ]


Isolation / Temperature / Pulse / Strain Gauge / Potentiometer / AC
Pneumatic / Function / Power Supply / Alarm / Power Mesurement
Trend & Log/Communication / Surge Protection / Other Topics
 
Copyright (C)2003-2017 M-System Co., Ltd. All rights reserved.