Terminal Block Signal Conditioners
M5-UNIT / W5-UNIT Series
M5-UNIT Series
W5-UNIT Series
Features
- PC-programmable model is also available.
Model:M5XV Other models will be available in near future.
- Power supply for AC (85-264V) is also available(*1) .
- All types with isolated terminals
- Provided with zero span adjustment
- Supports special specifications
- Test Report Free of Charge!(*2)
- Loop test output (M5X-UNIT Series)
(*1)CE marking is not available depending on the model.
(*2) If you need a test report, please contact your local distributor.They will send it to you
free of charge (pdf version only. Not available for all models).
Low Profile
M5-UNIT Series
The M5 Series offers low-profile terminal block style.
All models can be freely mounted onto thin panels.
- Power supply for AC (85-264V) is also available(*1).
Supporting 85-264 V AC, 24 V DC.
(*1)CE marking is not available depending on the model.
- PC-programmable models are also available.
The M5X-UNIT models allow PC settings.
16
Depending on the model.
No. of models bearing CE marking : 11
| Structure | : Low-profile terminal block |
| Connections | : M3.5 screw terminals |
| Input | : See List of Models |
| Output | : See the datasheet |
| Installation | : DIN rail mounting |
| Three-port isolation | ||
Dielectric strength: 2000 V AC @ 1 min. |
||
Dielectric strength: 1500 V AC @ 1 min. |
||
AC power supply: 85-264 VAC Specifications may vary depending on the model. |
||
Low Profile Signal Splitters
W5-UNIT Series
The W5 Series offers low-profile signal splitters with isolated dual outputs.
- Signal splitters with isolated dual outputs
Four-port isolation between the input, output 1, output 2, and power supply - Profile: 41 mm (1.77 in.)
W5 models can be installed on boards with a shallow depth. - Power supply for AC (85-264V) is also available(*1).
Supporting 85-264 V AC, 24 V DC, 11- 27 V DC, 110 V DC.(*1)CE marking is not available depending on the model.
8
-
Depending on the model.
No. of models bearing CE marking: 7
| Structure | : Low-profile terminal block |
| Connections | : M3.5 screw terminals (Input) |
| M3 screw terminals (Output and power supply) | |
| Input | : See List of Models |
| Output | : See the datasheet |
| Installation | : DIN rail mounting |
| Four-port isolation | ||
Dielectric strength: 2000 V AC @ 1 min. |
||
Dielectric strength: 1500 V AC @ 1 min. |
||
AC power supply: 85-264 V AC Specifications may vary depending on the model. |
||
Contributing to total cost reduction by saving space, energy, and wiring efforts
M6-UNIT Series
Ultra-slim Signal Conditioners
- Ultra-slim Signal Conditioners
Ultra-slim housings of only 5.9 mm (0.23 in.) wide
(M6D and M6S Series models) - Selectable Connection Styles
Tension-clamp, screw terminal, or Euro terminal style - Extra Performance for Ultra-slim Construction
The ultra-slim M6 Series has achieved 2000 V AC isolation with marginal dielectric strength. Despite its ultra-slim housing, the allowable load resistance is 550Ω for 4 to 20 mA DC output. It has an energy-saving design that does not bother users with heat generation even if M6 Series units are closely mounted in the case of high-density installation. - Power supply for AC (100-240V) is also available(*3).
Supporting 24 V DC, 100 to 240 V AC .
(Only the M6xYV, M6xXU, M6xVS models accept AC power supply.)
(*3)UL approval is not available depending on the model.
2-wire Signal Conditioners
B5-UNIT Series
Super-mini 2-wire Terminal Block
Signal Conditioners
Only 41 mm (1.61 in.) deep modules can be installed anywhere,
even behind the panel cover.● 41 mm (1.61”) deep
● Linearization, burnout protection, cold junction
compensation (T/C input) standard
● Optional 25 msec. response time selectable
● Power indicator LED
