Services & Support > Software Download & Upgrade > W920FCFG
W920FCFG: WL40F Configurator Software
W920FCFG Configurator Software is used to monitor and set parameters for WL40F Series.

Press DOWNLOAD button for the ZIP archive file (W920FCFG_R2.zip) and save the archive on any folder you like.

Use an uncompressing tool to expand the downloaded archive.

For installing and using the W920FCFG Software, please refer to the W920FCFG Users Manual. 446 KB
<NOTE>
W920FCFG will require a PC Configurator Cable (model: MCN-CON or COP-US) to configure the device.
Model No. W920FCFG
Version 1.0.5
Applicable Modules

WL40MW1F, WL40W1F-DAC4A, WL40W1F-DS2

OS

Windows 7 (32bit/64bit),
Windows 8 (32bit/64bit),
Windows 10 (32bit/64bit)

System Serial port (COM1 through COM16) or USB Port
RAM must satisfy the operating system’s requirements.
Minimum free hard disk area 10 MB
Release Date July 12, 2018
File ID ZIP Archive: W920FCFG_R2.zip
File Size 1.3 MB


CANCEL
ZIP Archive
DOWNLOAD NOW
 

Copyright (C) 2018-2019 M-System Co., Ltd. All rights reserved.