Services & Support > Software Download & Upgrade > W2CFG
W2CFG: W2 Configurator Software
W2CFG Configurator Software is used to monitor and set parameters for W2 Series Programmable Transmitters.

Press DOWNLOAD button for the ZIP archive file (W2CFG_R4.zip) and save the archive on any folder you like.

Use an uncompressing tool to expand the downloaded archive.

For installing and using the W2CFG Software, please refer to the W2CFG Users Manual. 1.1 MB

< NOTE >
When programming a W2 module using the W2CFG, PC Configurator Cable (model: MCN-CON or COP-US) is required to connect the module to a PC.

Model No. W2CFG
Version
1.30  
Applicable W2 Modules W2XR, W2XM, W2XF, W2XT
OS Windows 7 (32 bits, 64bits),
Windows 10 (32 bits, 64bits)
System Serial port (COM1 through COM16) or USB Port
RAM must satisfy the operating system’s requirements.
Minimum free hard disk area 10 MB
Release Date April 25, 2011
File ID ZIP Archive: W2CFG_R4.zip
File Size 460KB


CANCEL
ZIP Archive
DOWNLOAD NOW
 

Copyright (C) 2008-2019 M-System Co., Ltd. All rights reserved.