Download > Software Download & Upgrade > TRGCFG
TRGCFG: TR30-G PC Configurator Software
The TRGCFG PC Configurator Software is used to change and save configuration data and to perform maintenance for TR30-G via a PC.

Press DOWNLOAD button for the ZIP archive file ( and save the archive on any folder you like.

Use an uncompressing tool to expand the downloaded archive.

For installing and using the TRGCFG Software, please refer to the TR30-G Users Manual. 34.1MB

< Downloading USB driver software >
• In order to connect a PC with TRGCFG and TR30-G, TR30 USB Driver software is required beside TRGCFG. Install TRGCFG configurator software and TR30 USB Driver software in the PC.

→ In downloading the R30/TR30 USB Driver

< NOTE >
In order to connect a PC with TRGCFG and the TR30-G via USB, a USB cable (TypeA – MinB) is required.

Model No. TRGCFG


Applicable Modules TR30-G
OS Windows 7 (32 bit/64 bit)
Windows 8.1 (32 bit/64 bit)
Windows 10 (32 bit/64 bit) except Windows RT
The software may not operate adequately in certain conditions.
System USB Port (COM1 through COM20)
RJ-45 connector for Ethernet
RAM must satisfy the operating system's requirements.
Release Date February 25, 2019
File ID ZIP Archive:
File Size 495 KB

ZIP Archive

Copyright (C) 2017-2019 M-System Co., Ltd. All rights reserved.