Services & Support > Software Download & Upgrade > TC10CFG
TC10CFG: TC10 Configurator Software
TC10CFG Configurator Software is used to monitor and set parameters for TC10 Series Programmable Transmitters.

Press DOWNLOAD button for the ZIP archive file (TC10CFG_R3.zip) and save the archive on any folder you like.

Use an uncompressing tool to expand the downloaded archive.


For installing and using the TC10CFG Software, please refer to the TC10CFG Users Manual. 651 KB

< NOTE >
When programming a TC10 module using the TC10CFG, PC Configurator Cable (model: MCN-CON or COP-US*) is required to connect the module to a PC.
*The COP-US is usable with Windows 2000 or later-version OS.

Model No. TC10CFG
Version
1.1.15  
Applicable Model TC10EM, TC10NM
OS Windows 7(32bit/64bit), Windows Vista(32bit), Windows XP
System Serial port (COM1 through COM16) or USB Port
RAM must satisfy the operating system’s requirements.
Minimum free hard disk area 10 MB
Release Date July 30, 2015
File ID ZIP Archive: TC10CFG_R3.zip
File Size 489 KB


CANCEL
ZIP Archive
DOWNLOAD NOW
 

Copyright (C) 2015-2019 M-System Co., Ltd. All rights reserved.