Services & Support > Software Download & Upgrade > SCCFG
SCCFG: SC100 / 200 Series Configurator Software
Release Date
Update History
Update Version
Feb. 16, 2012
Applied to the SC Series LCD firmware version 1.30 or later versions 1.30
Mar. 28, 2013
Applied to the SC Series LCD firmware version 1.50 or later versions 1.50
Sep. 12, 2013
Fixed that when configuration data without Controller Group (02, 03) is uploaded from SC100/SC200 Series and downloading it into SC100/SC200 Series, it may fail. 1.70
Sep. 20, 2016

Fixed that in case a device is registered in COM port 21, the application terminates when 'Port setting' button is pressed.

1.82
Mar. 07, 2019
Applied to SC200D 1.83

SCCFG Configurator Software is used to set parameters and upload/save short trend data of the SC100/200 Series Multi-function PID Controllers.

Press DOWNLOAD button for the ZIP archive file (SCCFG_EG_V183.zip) and save the archive on any folder you like.

Use an uncompressing tool to expand the downloaded archive.

For installing and using the SCCFG Software, please refer to the SCCFG Users Manual. 474 KB

< NOTE >
Use M-System model: COP-IRDA to communicate with the SC Series devices via infrared radiation

Model No. SCCFG
Version
1.83  
OS Windows Vista (32 bits), Windows XP SP3,
Windows 7 Professional (32 bits/64 bits),
Windows 10 (32 bits/64 bits)
System USB Port (for COP-IRDA or COP-US, COM1 through COM20)
RAM must satisfy the operating system’s requirements.
Minimum free hard disk area 10 MB
Release Date March 07, 2019
File ID ZIP Archive: SCCFG_EG_V183.zip
File Size

205 KB



CANCEL
ZIP Archive
DOWNLOAD NOW
 

Copyright (C) 2009-2019 M-System Co., Ltd. All rights reserved.