Services & Support > Software Download & Upgrade > R8CFG
R8CFG: R8 Configurator Software
R8CFG Configurator Software is used to monitor and set parameters for R8 Series Programmable Transmitters.

Press DOWNLOAD button for the ZIP archive file (R8CFG_R16.zip) and save the archive on any folder you like.

Use an uncompressing tool to expand the downloaded archive.

For installing and using the R8CFG Software, please refer to the R8CFG Users Manual. 924 KB

< NOTE >
When programming a R8 module using the R8CFG, PC Configurator Cable (model: MCN-CON or COP-US*) is required to connect the module to a PC.
*The COP-US is usable with Windows 2000 or later-version OS.

Model No. R8CFG
Version
1.15  
Applicable R8 Modules

Power/Network Module: R8-NM1, R8-NECT1, R8-ND1, R8-NC3
I/O Module: R8-SS2, R8-SS4NJ, R8-SS4N,
R8-SST8, R8-SV2, R8-SV4N, R8-TS2,
R8-RS4N, R8-FS16N, R8-CT4E, R8-YS2,
R8-YS2NJ, R8-YST4N, R8-YV4N, R8-PA4,
R8-PA4F,R8-PC4A, R8-DA4A, R8-DAM16A,
R8-DAT16A2, R8-DC4A, R8-DC4A2,
R8-DC4C, R8-DCT4D, R8-DCM16A,
R8-DCM16ALZ, R8-DCM16ALK,
R8-DCM16ALH, R8-DCM32B2,
R8-DCT16A2, R8-TC2

OS Windows 7 (32bit/64bit),
Windows 8 (32bit/64bit),
Windows 10 (32bit/64bit),
System Serial port (COM1 through COM16) or USB Port
RAM must satisfy the operating system’s requirements.
Minimum free hard disk area 10 MB
Release Date October 04, 2018
File ID ZIP Archive: R8CFG_R16.zip
File Size 1.3 MB


CANCEL
ZIP Archive
DOWNLOAD NOW
 

Copyright (C) 2016-2019 M-System Co., Ltd. All rights reserved.