Download > Software Download & Upgrade > R30CFG
R30CFG: R30 PC Configurator Software
R30CFG Configurator Software is used to monitor and set parameters for R30 Series Remote I/Os.

Press DOWNLOAD button for the ZIP archive file (R30CFG_V11359.zip) and save the archive on any folder you like.

Use an uncompressing tool to expand the downloaded archive.

For installing and using the R30CFG Software, please refer to the R30CFG Users Manual. 4.1 MB
< Downloading USB driver Software >
• In order to connect a PC with R30CFG, R30 USB Driver software is required beside R30CFG. Install R30CFG configurator software and R30 USB Driver software in the PC.

→ In downloading the R30/TR30 USB Driver
< NOTE >
When programming a R30 module using the R30CFG, a USB cable (Type A - Min B) is required to connect the module to a PC.
Model No. R30CFG
Version
1.13.59 → To customers using a version earlier than V1.11.56
Applicable R30 Modules Network Module : R30NECT1, R30NCIE1, TR30
I/O Modules : R30SV2, R30SV4, R30SVF4, R30TS4,
R30RS4, R30MS4, R30CT4E, R30US2, R30US4,
R30YV4, R30YS4, R30PA2, R30GCIE1, R30XN16, R30YN16
OS

Windows 7 (32bit/64bit)
Windows 8.1 (32bit/64bit) except Windows RT
Windows 10 (32bit/64bit)
The software may not operate adequately in certain conditions.

System Serial port (COM 1 through COM 16) or USB port
RAM must satisfy the operating system’s requirements.
Release Date January 17, 2019
File ID ZIP Archive: R30CFG_V11359.zip
File Size 3.9 MB


CANCEL
ZIP Archive
DOWNLOAD NOW
 

Copyright (C) 2017-2019 M-System Co., Ltd. All rights reserved.