Services & Support > Software Download & Upgrade > R1CON
R1CON: R1 Configurator Software
R1CON Configurator Software is used to monitor and set parameters for R1 series network modules and I/O modules.

Press DOWNLOAD button for the ZIP archive file (R1CON_V150.zip) and save the archive on any folder you like.

Use an uncompressing tool to expand the downloaded archive.

For installing and using the R1CON Software, please refer to the R1CON Users Manual
< NOTE >
  • When programming the R1M module using the R1CON, PC Configurator Cable (model: MCN-CON or COP-US*) is required to connect the module to a PC.
    *The COP-US is usable with Windows 2000 or later-version OS.
  • If an older version program is in your PC, please remove it before installing the update.
  • Model No. R1CON
    Version
    1.5  
    Applicable R1 Modules R1M-GH2, R1M-J3, R1M-A1(C1), R1M-D1(C1), R1M-P4, R1MS-GH3, R1C-GH, R1D-GH2
    OS

    Windows 7 (32bit/64bit) ,
    Windows 10 (32bit/64bit)

    System Serial port (COM1, COM2)
    Minimum 32 MB RAM
    Minimum 15 MB free hand disk space
    Release Date August 24, 2005
    File ID ZIP Archive: R1CON_V150.zip
    File Size 5.5 MB


    CANCEL
    ZIP Archive
    DOWNLOAD NOW
     

    Copyright (C) 2004-2019 M-System Co., Ltd. All rights reserved.