Services & Support > Software Download & Upgrade > M3SCFG
M3SCFG: M3S Configurator Software
M3SCFG Configurator Software is used to monitor and set parameters for M3S Series Programmable Transmitters.

Press DOWNLOAD button for the ZIP archive file (M3SCFG_R3.zip) and save the archive on any folder you like.

Use an uncompressing tool to expand the downloaded archive.

For installing and using the M3SCFG Software, please refer to the M3SCFG Users Manual. 950 KB
<NOTE>
When programming an M3S module using the M3SCFG, PC Configurator Cable (model: MCN-CON or COP-US) is required to connect the module to a PC.
Model No. M3SCFG
Version
1.20  
Applicable M3S Modules

M3SXV, M3SXT, M3SXR, M3SXM

OS

Windows 7 (32bit/64bit),
Windows 10 (32bit/64bit)

System Serial port (COM1 through COM16) or USB Port
RAM must satisfy the operating system’s requirements.
Minimum free hard disk area 10 MB
Release Date Apr 12, 2011
File ID ZIP Archive: M3SCFG_R3.zip
File Size 438 KB


CANCEL
ZIP Archive
DOWNLOAD NOW
 

Copyright (C) 2007-2019 M-System Co., Ltd. All rights reserved.