Services & Support > Software Download & Upgrade > M2ECFG
M2ECFG: M2E Configurator Software
M2ECFG Configurator Software is used to monitor and set parameters for M2E Series Programmable Transmitters.


Press DOWNLOAD button for the ZIP archive file (M2ECFG_V106.zip) and save the archive on any folder you like.

Use an uncompressing tool to expand the downloaded archive.

For installing and using the M2ECFG Software, please refer to the M2ECFG Users Manual. 880 KB

< NOTE >
When programming a M2E module using the M2ECFG, PC Configurator Cable (model: MCN-CON or COP-US) is required to connect the module to a PC.

Model No. M2ECFG
Version
V1.6.51  
Applicable M2E Modules M2EXV, M2EXM, M2EXR, M2EXT, M2EXS, M2EXDY
OS Windows 7(32bit/64bit),
Windows 8.1(32bit/64bit),
Windows 10(32bit/64bit)
System Serial port (COM1 through COM16) or USB Port
RAM must satisfy the operating system’s requirements.
Release Date July 17, 2018
File ID ZIP Archive: M2ECFG_V106.zip
File Size 4 MB


CANCEL
ZIP Archive
DOWNLOAD NOW
 

Copyright (C) 2016-2019 M-System Co., Ltd. All rights reserved.