Services & Support > Software Download & Upgrade > FAMCLCFG
FAMCLCFG: FAMCL Configurator Software

FAMCL Configurator Software is used to set parameters for FAMCL module..

Press DOWNLOAD button for the ZIP archive file (FAMCLCFG_V10424.zip) and save the archive on any folder you like.

Use an uncompressing tool to expand the downloaded archive.

For installing and using the FAMCLCFG Software, please refer to the FAMCLCFG Users Manual. 1.4MB

< Sample definition file >
Definition fie for FAMCL-1 module sample version used for high functionality register monitor of the Yokogawa FA-M3 Programming Tool WideField3 is available.

< NOTE >
In order to use the FAMCLCFG, the Yokogawa FA-M3 Programming Tool WideField3 (R3.02 or later (R.4 or later if your OS is Windows 10)) is required. Install the FAMCLCFG to the PC where the WideField3 is installed.

The FAMCLCFG communicates with the FAMCL via CPU module for FA-M3. The FAMCL communicates with CPU module with USB, LAN or serial communication (KM13-1S is used). Prepare a communication cable that supports the CPU module in use.

USB driver accompanied with the WideField3 is required when communication with USB.
The driver software for KM13-1S is required when KM13-1S cable is used. The driver software for KM13-1S is available to download in the web site for FA-M3..
Model No. FAMCLCFG
Version
1.04.24  
Applicable Modules CC-Link master module FAMCL, Yokogawa Electric FA-M3 supported
OS

Windows 7 (32bit/64bit)
Windows 8.1 (32bit/64bit) except Windows RT
Windows 10 (32bit/64bit)
The software may not operate adequately in certain conditions.

System

Serial Port (COM1 through COM32: for use with KM13-1S), USB Port or LAN Port
CPU, memory must satisfy the operating system's requirements by Microsoft.

Release Date March 22, 2019
File ID ZIP Archive: FAMCLCFG_V10424.zip
File Size 1.1MB


CANCEL
ZIP Archive
DOWNLOAD NOW
 

Copyright (C) 2016-2019 M-System Co., Ltd. All rights reserved.