Services & Support > Software Download & Upgrade > DLCFG
DLCFG: DL8 PC Configurator Software

The DLCFG PC Configurator Software is used to change and save configuration data and to perform maintenance for DL8 via a PC.

Press DOWNLOAD button for the ZIP archive file (DLCFG_EG_V20.zip) and save the archive on any folder you like.

Use an uncompressing tool to expand the downloaded archive.

For using the DLCFG Software, please refer to the DL8 Users Manual. 17.1MB

< NOTE >
• In order to connect a PC to the miniature jack for DLCFG (CFG) of DL8, a PC configurator cable (model: COP-US) is required.
• In order to connect a PC and the DL8 via network, an Ethernet cable is required.

Model No. DLCFG
Version
2.0.17  
OS Windows 7 (32 bit/64 bit), Windows 8.1 (32 bit/64 bit), Windows 10 (32 bit/64 bit) except Windows RT
The software may not operate adequately in certain conditions.
System

USB Port (for COP-US COM1 through COM20)
RJ-45 connector for Ethernet
RAM must satisfy the operating system’s requirements.
Minimum free hard disk area 10 MB

Release Date October 18, 2018
File ID ZIP Archive: DLCFG_EG_V20.zip
File Size 469 KB


CANCEL
ZIP Archive
DOWNLOAD NOW
 

Copyright (C) 2015-2019 M-System Co., Ltd. All rights reserved.