M-System Signal Conditioners Data Library
GENERAL SPEC SHEET
PDF
Files in PDF format require Adobe Acrobat Reader.

.
Back to Main
K-UNIT Series Plug-in Signal Conditioners
DC Inputs, Isolators
BACK TO TOP
KYV Isolator         Specification sheet Instruction Manual  
KSN Input Loop Powered Isolator         Specification sheet Instruction Manual  
KSN/CE Input Loop Powered Isolator (CE) CE       Specification sheet Instruction Manual  
KVS Signal Transmitter (3-port isolation)         Specification sheet Instruction Manual  
KVS/CE Signal Transmitter (3-port isolation, CE) CE       Specification sheet Instruction Manual  
KWVS Signal Transmitter (two isolated outputs)         Specification sheet Instruction Manual  
KWVS2 Signal Transmitter (two isolated outputs, CE) CE       Specification sheet Instruction Manual  
KSF Signal Transmitter (high speed response)         Specification sheet Instruction Manual  
KSF/CE Signal Transmitter (high speed response, CE) CE       Specification sheet Instruction Manual  
KV Signal Transmitter (non-isolated)         Specification sheet Instruction Manual  
KV/CE Signal Transmitter (non-isolated, CE) CE       Specification sheet Instruction Manual  
Temperature Inputs
BACK TO TOP
KTS Thermocouple Transmitter         Specification sheet Instruction Manual  
KTS/CE Thermocouple Transmitter (CE) CE       Specification sheet Instruction Manual  
KWTS Thermocouple Transmitter (two isolated outputs)         Specification sheet Instruction Manual  
KR RTD Transmitter (non-isolated)         Specification sheet Instruction Manual  
KRS RTD Transmitter (3-port isolation)         Specification sheet Instruction Manual  
KR/CE RTD Transmitter (non-isolated, CE) CE       Specification sheet Instruction Manual  
KRS/CE RTD Transmitter (3-port isolation, CE) CE       Specification sheet Instruction Manual  
KWRS RTD Transmitter (two isolated outputs)         Specification sheet Instruction Manual  
KWRS2 RTD Transmitter (two isolated outputs, CE) CE       Specification sheet Instruction Manual  
Potentiometer Inputs
BACK TO TOP
KM Potentiometer Transmitter (non-isolated)         Specification sheet Instruction Manual  
KMS Potentiometer Transmitter (3-port isolation)         Specification sheet Instruction Manual  
KM/CE Potentiometer Transmitter (non-isolated, CE) CE       Specification sheet Instruction Manual  
KMS/CE Potentiometer Transmitter (3-port isolation, CE) CE       Specification sheet Instruction Manual  
KWMS Potentiometer Transmitter (two isolated outputs)         Specification sheet Instruction Manual  
KWMS2 Potentiometer Transmitter (two isolated outputs, CE) CE       Specification sheet Instruction Manual  
AC & Other Inputs
BACK TO TOP
KG Strain Gauge Transmitter (non-isolated)         Specification sheet Instruction Manual  
KGS Strain Gauge Transmitter (3-port isolation)         Specification sheet Instruction Manual  
KTG Tachogenerator Transmitter         Specification sheet Instruction Manual  
KAC AC Transmitter         Specification sheet Instruction Manual  
KP PT Transmitter (average sensing, RMS calibrated)         Specification sheet Instruction Manual  
KPE PT Transmitter (RMS sensing)         Specification sheet Instruction Manual  
KPNA PT Transmitter (self-powered, average sensing, RMS calibrated)         Specification sheet Instruction Manual  
KPNE PT Transmitter (self-powered, RMS sensing)         Specification sheet Instruction Manual  
KCEC CT Transmitter (clamp-on current sensor)         Specification sheet Instruction Manual  
KC CT Transmitter (average sensing, RMS calibrated)         Specification sheet Instruction Manual  
KCE CT Transmitter (RMS sensing)         Specification sheet Instruction Manual  
KC/CE CT Transmitter (average sensing, RMS calibrated, CE) CE       Specification sheet Instruction Manual  
KCE/CE CT Transmitter (RMS sensing, CE) CE       Specification sheet Instruction Manual  
KCNA CT Transmitter (self-powered, average sensing, RMS calibrated)         Specification sheet Instruction Manual  
KCNE CT Transmitter (self-powered, RMS sensing)         Specification sheet Instruction Manual  
KCEZ ZCT Transmitter (zero-phase current transformer input)         Specification sheet Instruction Manual  
DC Supplies
BACK TO TOP
KD Current Loop Supply (non-isolated)         Specification sheet Instruction Manual  
KD/CE Current Loop Supply (non-isolated, CE) CE       Specification sheet Instruction Manual  
KDY Current Loop Supply (3-port isolation)         Specification sheet Instruction Manual  
KWDY Current Loop Supply (two isolated outputs)         Specification sheet Instruction Manual  
KWDNY Current Loop Supply (isolated two outputs; with square rootextractor)         Specification sheet Instruction Manual  
KWLD Current Loop Supply (for level transmitter use)         Specification sheet Instruction Manual  
Frequency I/O
BACK TO TOP
KEP Ultra-Low Frequency Transmitter (0.01 Hz minimum)         Specification sheet Instruction Manual  
KSP Low Frequency Transmitter (50 Hz minimum)         Specification sheet Instruction Manual  
KSP-ME Low Frequency Transmitter (50 Hz minimum, for Mitsubishi inverter)         Specification sheet Instruction Manual  
KPAU Frequency Transmitter (field-configurable) CE       Specification sheet Instruction Manual  
KAP DC/Frequency Converter         Specification sheet Instruction Manual  
KAPU DC/Frequency Converter (field-configurable)         Specification sheet Instruction Manual  
KYPD Pulse Isolator (built-in excitation)         Specification sheet Instruction Manual Ordering Information Sheet
KWYPD Pulse Isolator (isolated two outputs; built-in excitation)         Specification sheet Instruction Manual Ordering Information Sheet
KMT Contact Isolator         Specification sheet Instruction Manual  
KPRU Pulse Scaler (field-configurable)         Specification sheet Instruction Manual  
Limit Alarms
BACK TO TOP
KS2V2 DC Input Limit Alarm (digital adjustments; dual alarm trip) CE       Specification sheet Instruction Manual  
KS2V DC Input Limit Alarm (digital adjustments) CE UL C-UL   Specification sheet Instruction Manual  
KS2TR Temperature Input Limit Alarm (digital adjustments) CE UL C-UL   Specification sheet Instruction Manual  
KSED DC Alarm (thumbwheel switch adjustment) CE UL C-UL   Specification sheet Instruction Manual  
KSE1 DC Alarm (dial adjustments; single trip) CE       Specification sheet Instruction Manual  
KSE2 DC Alarm (dial adjustments; dual trip) CE       Specification sheet Instruction Manual  
KS DC Alarm         Specification sheet Instruction Manual  
KS5 DC Alarm (SPDT contact)         Specification sheet Instruction Manual  
KS/CE DC Alarm (CE) CE       Specification sheet Instruction Manual  
KS2 DC Alarm (dual SPDT output, CE) CE       Specification sheet Instruction Manual  
KSL DC Alarm (rotary switch adjustments)         Specification sheet Instruction Manual  
KSL5 DC Alarm (rotary switch adjustments, SPDT contact)         Specification sheet Instruction Manual  
KSL/CE DC Alarm (rotary switch adjustments, CE) CE       Specification sheet Instruction Manual  
KSL2 DC Alarm (rotary switch adjustment, dual SPDT output, CE) CE       Specification sheet Instruction Manual  
BCD Transducers
BACK TO TOP
KDA3 D/A Converter (16-bit resolution; programmable with programming unit)         Specification sheet Instruction Manual  
Function Modules
BACK TO TOP
KWSBS Analog Subtractor (two isolated outputs)         Specification sheet Instruction Manual  
KMM Multiplier         Specification sheet Instruction Manual  
KB Ratio Transmitter (with output bias, non-isolated)         Specification sheet Instruction Manual  
KBS Ratio Transmitter (with output bias; 3-port isolation)         Specification sheet Instruction Manual  
KADS Analog Adder         Specification sheet Instruction Manual  
KSBS Analog Subtractor         Specification sheet Instruction Manual  
KMLS Digital Multiplier         Specification sheet Instruction Manual  
KDIS Digital Divider         Specification sheet Instruction Manual  
KX Linearizer         Specification sheet Instruction Manual Ordering Information Sheet
KN Square Root Extractor (non-isolated)         Specification sheet Instruction Manual  
KNS Square Root Extractor (3-port isolation)         Specification sheet Instruction Manual  
KL Limiter (non-isolated)         Specification sheet Instruction Manual  
KLS Limiter (3-port isolation)         Specification sheet Instruction Manual  
KU Reverse Transmitter (non-isolated)         Specification sheet Instruction Manual  
KUS Reverse Transmitter (3-port isolation)         Specification sheet Instruction Manual  
KF Delay Buffer (non-isolated)         Specification sheet Instruction Manual  
KFS Delay Buffer (3-port isolation)         Specification sheet Instruction Manual  
KA Track/Hold (non-isolated)         Specification sheet Instruction Manual  
KAS Track/Hold (3-port isolation)         Specification sheet Instruction Manual  
KH Peak Hold (non-isolated)         Specification sheet Instruction Manual  
KHS Peak Hold (3-port isolation)         Specification sheet Instruction Manual  

Back to Main