ec_z750_a_a

4/48

4SignalConditionersIndicatorsPowerTransducersRecordersTemperatureControllersLimit Alarms4-wire Signal Conditioners2-wire Signal ConditionersFunction Modules & Retrofit ProductsTower LightsMultiplex Transmission SystemPID ControlComponentsRemote I/OWeb Data LoggersElectric ActuatorsLightning SurgeProtectorsSignal Conditioners Selection Guide 1Focused New Products for JapanSignal Conditioners Selection Guide 2M-SystemCompanyM2VS DC input, fixed rangeW2VS DC input, fixed range, signal splitterM6xXV DC input, programmable rangeSame panel oradjacent panelsDesigned primarily for front-ending PLC/DCS systems which are mounted within the same panel or adjacent to it.The isolator module is powered from terminals separate from signal lines.manufacturing processFour-wire isolator : 4-20 mA (passive) input / 4-20 mA output / Line powerede.g.DCSPLCBasic isolator designed to interface a PLC and DCS system with a field instrument.The isolator module supplies 24 Vdc power to the field device and provides a linearized output signal if necessary.systemmanufacturing sitesFour-wire isolator / current loop supply : 4-20 mA (active) input / 4-20 mA output / Line powered4-20 mAM2DYS Fixed rangeW2DYS Fixed range, signal splitterM3LDY Programmable linearization4-20 mAPLC / DCS250ΩFlowmeterLevel controlField device4-20 mAField device250Ω4-20 mAe.g.24Vdc excitationand signal lineSecond PLCChoose by Housing and Terminal Access StylesChoose by I/O Signal TypesChoose by FunctionsChoose by Power SupplySIGNAL CONDITIONERSISOLATOR APPLICATIONSIsolator is installed between a transmitter (i.e. sensor) and a receiver to galvanically isolate DC signals.Breaking the path between a field instrument and a control room device minimizes various influences coming from the field site to the control room.In addition, each instrument separated by galvanic isolation can choose its own ground point independently from other ones, avoiding the ‘ground loop’ problem.Lastly, the isolator can provide impedance conversion to beat loop impedance constraints, and signal level conversion (e.g. from 10-50 mA to 4-20 mA) function. A signal conditioner is used to condition and convert a field sensor signal suitable for processing with the PLC/DCS in a wide variety of process plants and factories. Typical applications are: Signal conversion Signal isolation to stop ground loops Signal boosting to increase load drive capabilityM-System signal conditioners are available with wide combinations of process signal I/O, power input and mounting configuration. Additionally, M-System offers the broadest line of signal splitters available.1

※このページを正しく表示するにはFlashPlayer10.2以上が必要です