L.S.P. E

15/28

Released August 200715Model No.Discharge VoltageMax. Surge VoltageResponse TimeDischarge CurrentMax. Load CurrentInternal ResistanceMDP-TC7.5V min.16V max.0.1 µsec. max.5000A (8/20 µsec.)100 mAapprox. 20 Ω (incl. return)MDP-TCThermocouple, Plug-in TypeModel No.Max. Cont. Operat. Volt. (Uc)Voltage Protection Level (Up)Response TimeMax. Discharge Curr. (Imax)Nominal Current (IN)Internal ResistanceTest StandardMD7TC7.5V25V max.4 nanosec. max.20kA (8/20 µsec.),1.0kA (10/350 µsec.)IEC61643-21(Categories C1, C2, D1)100 mA4.7Ω ±10% per lineNEWNEWNEWMD7TCThermocouple, Ultra-slim TypeSENSOR SIGNAL USEMDP-LCStrain Gauge, Plug-in TypeModel No.Discharge VoltageDischarge CurrentMDP-LC±0.3V min.15V min.±15V max.30V max.5 nsec. max.100A (8/20 µsec.)50A (8/20 µsec.)Line SideExc. SideLine SideExc. SideLine SideExc. SideMax. Surge VoltageResponse TimeModel No.Max. Cont. Operat. Volt. (Uc)Voltage Protection Level (Up)Response TimeMax. Discharge Curr. (Imax)Nominal Current (IN)Internal ResistanceTest StandardMD7PM7.5V25V max.4 nanosec. max.20kA (8/20 µsec.),1.0kA (10/350 µsec.)IEC61643-21(Categories C1, C2, D1)100 mA4.7Ω ±10% per lineModel No.Discharge VoltageMax. Surge VoltageResponse TimeDischarge CurrentMax. Load CurrentInternal ResistanceMDP-RB±3V min.±16V max.0.1 µsec. max.5000A (8/20 µsec.)100 mAMDP-RBRTD, Plug-in TypeModel No.Max. Cont. Operat. Volt. (Uc)Voltage Protection Level (Up)Response TimeMax. Discharge Curr. (Imax)Nominal Current (IN)Test StandardMD7RB±3V±25V max.4 nanosec. max.20kA (8/20 µsec.),1.0kA (10/350 µsec.)IEC61643-21(Categories C1, C2, D1)Internal Resistance5.12Ω ±0.3%,±30 ppm/°C per line100 mANEWNEWNEWMD7RBRTD, Ultra-slim Type Model No.Discharge VoltageMax. Surge VoltageResponse TimeDischarge CurrentMax. Load CurrentInternal ResistanceMDP-PM7.5V min.16V max.0.1 µsec. max.5000A (8/20 µsec.)100 mA10 Ω ±0.1%, 30 ppm/°CMDP-PMPotentiometer, Plug-in TypeNEWNEWNEWMD7PMPotentiometer, Ultra-slim TypeNEWNEWNEWMD7LCStrain Gauge, Ultra-slim Type10 Ω ±0.1%,30 ppm/°C (3-wire)

※このページを正しく表示するにはFlashPlayer10.2以上が必要です