IT40SW / IT50SW / IT60SW Series
Wireless LAN Tower Light

model: IT40SW, IT50SW and IT60SW

IT40SW IT50SW IT60SW
model:IT40S, IT50S and IT60S
This device is approved for use in all EU member countries.
  • Energy saving, maintenance free LED lights
  • Remote monitoring and data logging via WLAN network by bridging signals to/from Ethernet Modbus/TCP I/Os

  • WLAN access point and infrastructure mode
  • Bright and even illumination thanks to M-System’s original reflection system
  • Rugged IP 65 construction is ideal for harsh industrial applications

M-System IT40SW, IT50SW and IT60SW Series are preassembled tower lights of 40-mm, 50-mm and 60-mm diameter LED modules with wireless LAN connectivity. The WLAN access point built in the IP 65 protected tower light is a simple and practical solution for status remote monitoring, data logging and supervisory control of manufacturing equipment and processes in harsh industrial environment.

The WLAN capability complying with IEEE 802.11b/g/n allows a wide compatibility with M-System’s and other manufacturers’ remote I/O modules and web-enabled data loggers, thus realizing versatile applications such as data acquisition and control of multiple machines by single master PLC located in one without needing hardwiring between each of them, or event notification to tablet devices with texts and images from manufacturing equipment.

The LED lights are controlled either by local contact inputs or by a host PLC/PC via Modbus/TCP network.

 

APPLICATION Remote monitoring and control of an equipment using mobile interface

When an abnormality occurs in a manufacturing equipment built with a web-enabled remote terminal, alarm status information including images and texts can be sent to tablets and smart phones via a wireless LAN tower light. (Customer’s application software needed to communicate with tablets)

Remote monitoring and control of an equipment using mobile interface

APPLICATION No hardwiring between multiple sets of equipment to monitor and
control by a single master PLC

Multiple slave machines can be monitored and controlled by a single master PLC via wireless LAN network.
Energy consumption, temperature and other measuring points can be monitored by the PLC together with lamp status information.

No hardwiring between multiple sets of equipment to monitor and 
control by a single master PLC

Configuration Examples
1. Lamps are controlled by local inputs.
Local contact status can be acquired by the host PC/PLC.
Data is sent/received between the PC/PLC and remote I/O.

Configuration Examples 1

2. Lamps are controlled by the host PC/PLC.
Data is sent/received between the PC/PLC and remote I/O.

Configuration Examples 2

 
 
SELECTION GUIDE
FUNCTION MODEL NO. DIAMETER SPEC
WLAN Access Point IT60SW2
φ60 mm (2.36”) PDF
IT50SW2 φ50 mm (1.97”) PDF
IT40SW2 φ40 mm (1.57”) PDF
WLAN Client IT60SW1 φ60 mm (2.36”) PDF
IT50SW1 φ50 mm (1.97”) PDF
IT40SW1 φ40 mm (1.57”) PDF
 
GENERAL SPECIFICATIONS
Degree of protection IP 65, vertical mounting only (except the bottom connectors)
Connection
Power input
Contact input
Ethernet

UL 1007 AWG 20
UL 1007 AWG 22
RJ-45 connector
Housing material
Tower
Lens

Flame-resistant resin (white)
Flame-resistant resin (transparent)
DIP SW Light’s blinking frequency, buzzing ON/OFF frequency and volume level,
output at communication failure, IP address resetting
LEDs Max. 5 layers; free choice of colors among Red, Amber, Green, Blue, White LED, continuous or intermittent
(approx. 2 Hz or 10 Hz)
Status indicators Power, Run, Link, Link100, COL, WLAN1
Buzzing Approx. 3.3 kHz, continuous or intermittent (approx. 2 Hz or 10 Hz)
 
Wireless LAN
Standard IEEE 802.11b/g/n
Frequency band 2400 - 2483.5 MHz (ch.1 - ch.13)
Max. transmission distance (optical) Approx. 50 meters (depends on setting)
Access mode Infrastructure
Security WEP 64 bit/128 bit, WPA (TKIP, AES), WPA2 (TKIP, AES)
Number of clients 5
 
Modbus/TCP
Standard IEEE 802.3u
Transmission 10BASE-T, 100BASE-TX
Baud rate 10/100 Mbps (auto negotiation)
Data RTU (binary)
IP address 192.168.0.1 (default)
Selectable with PC Configurator
 
INSTALLATION
Power input 24 Vdc ±10% (ripple 10%p-p max.)
Operating temp -10 to +55°C (14 to 131°F)
Operating humidity 30 to 85% RH (non-condensing)
Atmosphere No corrosive gas
Mounting Surface (vertical direction only)
Mounting pole Pole with L-shape bracket or with mounting base (model: ITPL)
 
PERFORMANCE
Insulation resistance 100 MΩ or more with 500 Vdc
Dielectric strength 1500 Vac @1 minute (discrete input or power to network)
CE conformity R&TTE Directive (1995/5/EC)
 
MOUNTING POLE (option)
Model: ITPL
Pole with L-shape bracket Pole with mounting base
Pole with L-shape bracket Pole with mounting base
Product Bulletins (IT40SW, IT50SW, IT60SW)
A4: PDF  
   
Page top