47NL Series Ultra-slim Digital Panel Meter
Flat Rear Surface Stuck to the Panel with a Magnet !

47NLV
  • 96 x 48 mm (3.78" x 1.89")
  • Large 16 mm-high LED display: Bright and colorful
  • Mountable on standard 30 mm round panel cutout
  • IP 66 (except for magnet mounting)
  • Moving average function to suppress display flickering
  • High/low alarm trips
  • Short-depth flat type
  • 2-wire transmitter input (47NLDYx)
Model Features Spec
47NLV DC INPUT (4 1/2 digit, LED display type) PDF
47NLVT DC INPUT (4 1/2 digit, LED display type, with terminal block) PDF
47NLN LOOP POWERED (4 1/2 digit, LED display type) PDF
47NLNT LOOP POWERED (4 1/2 digit, LED display type, with terminal block) PDF
47NLR RTD INPUT (4 digit, LED display type) PDF
47NLRT RTD INPUT (4 digit, LED display type, with terminal block) PDF
47NLDY 2-WIRE TRANSMITTER INPUT (4 1/2 digit, LED display type) PDF
47NLDYT 2-WIRE TRANSMITTER INPUT (4 1/2 digit, LED display type, with terminal block) PDF

47NLV
* 47NLNx: red / green only  
 
ULTRA-SLIM DIGITAL PANEL METER

M-System model 47NL Series is a 1/8 DIN size (96 x 48 mm), 4 or 4 1/2 digit process meters.

The ultra-slim – only 18.5 mm (.73") thick – meter can be mounted on the panel surface, with no protrusion behind the panel except wires for electrical connection. It supports standard 30 mm circular panel cutout – the same size on which push-buttons and indicator lights are mounted. Typical drills found at production sites can be used to drill the holes into the panel, saving on the cost and time for installation.

Compared to conventional panel meters, the 47NL Series can dramatically reduce installation space in the control panel. Electrical wires connected to the tension-clamp terminals at the rear of the 47NLx can be directed downward so that its flat rear surface can be stuck to the panel surface even with a magnet. For users preferring barrier strip screw terminal block, the 47NLxT can be quickly connected with the dedicated wire harness to the separate terminal block at the rear of the panel.

Display range is scalable between -19999 and 19999 with selectable decimal point positions. (except for 47NLRx)
High/low limit alarm outputs are available. (except for 47NLNx)

 
TENSION-CLAMP TERMINAL BLOCK TYPE
47NLV: TENSION-CLAMP TERMINAL BLOCK TYPE
 
SCREW TERMINAL BLOCK TYPE
47NLVT: SCREW TERMINAL BLOCK TYPE
 
EXTERNAL DIMENSIONS unit: mm (inch)
47NLVT EXTERNAL DIMENSIONS
 
 
Product Bulletins
A4: PDF Letter: PDF
   
Data Sheet
Page top