Manufacture and sales of electronic devices supporting environmentally friendly automation| MG Co., Ltd.

Mail
  Sales Information & Technical Support

Compact, Mixed Signal Remote I/O
R30 Series

back

Compact, Mixed Signal Remote I/O R30 Series

Remote I/O Optimized for Ethernet Networks

  • Compact size
  • High speed bus
  • Wide selection of I/O modules and network modules
CE

Depending on the model.

Large No. of I/O Points Free Combinations Power Input 24 V DC Dual Redundant Power Supplies*1 Dual Redundant Communication Networks*1

*1. Under Development

Products Line up
Product Catalog
  • EtherCAT
  • PROFI NET*2
  • EtherNet/IP*2
  • CC-Link IE Field
  • CC-Link IE TSN
  • Modbus/TCP
  • MECHATROLINK*2
  • OPC UA

*2. Various network modules will be available in the near future.
The dual communication system is under development.

  • The R30 Series Remote I/O consists of a network module,I/O modules, a power supply module and an installation base in free combinations and doesn't require complicated settings.

  • R30 Configurator Software

    Model: R30CFG

    Software Download

    Basic Configurations

    Module Slots

    Mount the power supply module and network module on the dedicated slots (PWR and COM), and do not mount on I/O slots. PWR slot is on the left end and COM slot is on the immediate right of PWR slot.
    The I/O slots are numbered in the ascending order starting from the one on the immediate right of the network module (slot 1, slot 2...). A code indicating the I/O slot number is assigned to each I/O slot and I/O data is allocated in the order of this code. When an I/O slot is vacant, blank data is sent or received to/from the PLC, etc.

    Basic Configurations
  • Current Consumption

    The network module and I/O modules operate with approx. 21 V DC power supply via the power supply module. The total current consumption of the network module and I/O modules is required to be not more than the max. rated output current of the power supply module. If the total current consumption exceeds the capacity of the power supply module, change the conbination of I/O modules or reduce the number of I/O modules.

    Data Sheet [Current Consumption] (clink for more information)

Other Series