CB2   Computer Backup Station Holds and manipulates control signals in case of computer or DCS failure Specific output range within 0-20 mA or -10 to +12 Vdc 100, 110, 115, 120, 200, 220, 240 Vac or 12, 24 Vdc powered Ramp rate adjustable

MXCB CE Computer Backup Station with LED Display Manipulates/holds analog signals via contact input from a computer Manual control available by the ‘Soft-Terminal’ indicator/controller (model: ST/STL). Output selectable within 0-20 mA and +/-10 V 100-240 Vac, 12-24 Vdc, or 110 Vdc powered Restarts at the last stored value before power failure

AB2   Analog Backup Station Holds and manipulates control signals in case of computer or DCS failure Specific input within ±300 V; current input with a resistor Specific output range within 0-20 mA or -10 to +12 Vdc 100, 110, 115, 120, 200, 220, 240 Vac or 12, 24 Vdc powered Ramp rate adjustable

MXAB CE Analog Backup Station with LED Display Manipulates control signals from a computer or DCS Manual control in case of computer/DCS failure Input range selectable within +/-30 V Output selectable within 0-20 mA and +/-10 V 100-240 Vac, 12-24 Vdc, or 110 Vdc powered Restarts at the last stored value before power failure Ramp rate adjustable

ABF3   Analog Backup Station with Front Manual Loading Controls Holds/manipulates control signals in case of computer or DCS failure Bargraph indicating PV Digital display indicating PV/CAS/MV selectable 100-240 Vac or 24 Vdc powered 1/8 DIN size

Copyright (C)2004 M-System Co., Ltd. All rights reserved.