R2CON Configurator Software is used to monitor and set parameters
for R2M series network modules and I/O modules.
Self-expanding (R2CON_V100.exe) and ZIP (R2CON_V100.zip) archives are selectable
for your convenience.
| Self-expanding Archive: |
Locate the downloaded archive using Explorer on the Windows desktop,
and click it to automatically start decompressing process. Specify where you want
to unzip it or browse to locate the directory on the dialog box and press OK. |
| ZIP Archive: |
Use a decompressing tool to expand the downloaded archive. |
For installing and using the R2CON Software, please refer to the R2CON
Users Manual |
< NOTE >
When programming the R2M module using the R2CON, PC Configurator Cable (model: MCN-CON or COP-US*)
is required to connect the module to a PC.
*The COP-US is usable with Windows 2000 or later-version OS.
If an older version program is
in your PC, please remove it before installing the update. |
| Model No. |
R2CON |
| Version |
|
| Applicable R2 Modules |
R2M-2GH, R2M-2H3 |
| OS |
Windows XP, Windows 7 (32bit/64bit) |
| System |
Serial port (COM1, COM2)
Minimum 32 MB RAM
Minimum 15 MB free hand disk space |
| Release Date |
August 24, 2005 |
| File ID |
Self-expanding Archive: R2CON_V100.exe
ZIP Archive: R2CON_V100.zip |
| File Size |
5.2 MB |
|
